Products
-
QLD-010
-
Remove high temperat'...
-
Gluing assembly
-
High temperature clo'...
-
Crystal rod dismount'...
-
Crystal rod dismount'...
-
Single crystal scrap'...
-
Folding machine
-
Photovoltaic module '...
-
Secondary edging mac'...
-
Second edging machin'...
-
This section describ'...
-
Electrical cabinet l'...
-
Optical fiber test s'...
-
On-site PV module in'...
-
This device is part of the integrated solution for automatic junction box installation. It can automatically upright the lead and automatically remove the high temperature cloth from the backplane after the photovoltaic module is laminated, and realize the automatic gluing function of the backplane.
-
Remove high temperature cloth, vertical lead assembly
The Z-axis is moved up and down through two electric cylinders to achieve accurate adjustment of the height of the moving frame, convenient adjustment of the height of the claw, and optimization of the opposite drawing effect;
-
Gluing assembly
The Z-axis of the gluing component can be independently controlled by two linear modules, which can be moved up and down to accurately adjust the height of the glue head and optimize the gluing effect
-
High temperature cloth picking
The gripper assembly will remove the high-temperature cloth, move it through the Y axis, reach the high-temperature cloth storage slot, and accurately place the high-temperature cloth into the material slot.
-
Crystal rod dismounting automation
The equipment should mainly remove the packing belt and the top cover and the side box of the packaged crystal rod to achieve automation.
-
Crystal rod dismounting automation
Parameter classSpecific parameterXMS-CHT0Basic informationDevice functionAutomatic strippingPower sourceThree-phase five-wire 380V 50/60HzpowerPeak 50KW average about 35KWAir sourcePressure 0.6-0.8MPa 12mm gas pipeFlow rate 500L/minFloor space8600mmX8600mworkpiece1130X995X774/1130X995X1000(mm)Packin
-
Single crystal scraping and marking machine
the equipment set scraping knife components, visual components, waste collection components, laser line components in one. Integrated pressure regulating valve, pressure regulating gun, servo positioning, vacuum system, man-machine interface, visual camera detection, mechanical hand module trajectory motion control in one.
-
Folding machine
Beneficial effect: the utility model uses an automatic mechanism to replace the manual, greatly improves the folding molding effect, saves the labor cost and the cost of cleaning the base, and is more conducive to the subsequent unmanned production.
-
Photovoltaic module internal and external packaging production line
The utility model mainly solves the technical problem of providing a new large-size photovoltaic module packaging line with compact structure and stable operation, which can automatically package large-size photovoltaic module products, save space for subsequent container transportation, and meet the requirements of new-type large-size product packaging and transportation.
-
Secondary edging machine
To solve the problem that the tempered photovoltaic glass panel and the photovoltaic panel with tail material are easy to appear when the traditional trimming machine is trimming the photovoltaic panel, and the secondary trimming equipment is a fully automatic system, and the linear slide can be quickly adjusted to improve the module product specifications and work efficiency;
-
Second edging machine operation interface introduction
Convenient and accurate control of each function of the equipment, simple operation, easy later maintenance and modification content with output statistics, beat time display and other important functions, saving statistical time; Multiple modes are convenient to switch, eliminating the cumbersome function switch
-
This section describes the three-in-one operation interface at the bottom of the layer
Convenient and accurate control of each function of the equipment, simple operation, convenient for later maintenance and modification content with output statistics, beat time display and other important functions, saving statistical time; Multiple modes are convenient to switch, eliminating the cumbersome function switch
-
Electrical cabinet layout
As shown in the above figure, the architecture diagram of the electrical cabinet control system of this product. The whole equipment adopts PLC as the control system to coordinate the coordination of various system institutions, etc. The whole control system is equipped with a touch screen and an operation panel at the same time, which is convenient for the operator to set parameters, monitor the state of the production line, and run the production line.
CORE TECHNOLOGY
Professional 1 to 1 decoration service
-
Equipment design
and engineeringThe company has advanced equipment design and01
engineering capabilities... -
Machining and
manufacturing technologyThe company has exquisite machining and02
manufacturing technology... -
Electronic technology
and circuit designThe company has professional knowledge and03
experience in electronic technology ...
-

Technological advantage
Won a number of high-tech invention patents;
Overcome several unsuccessful projects of other enterprises;
Excavate and use a variety of scarce materials;Technological advantage
Won a number of high-tech invention patents;
Overcome several unsuccessful projects of other enterprises; Excavate and use a variety of scarce materials; -

Product advantage
Operation of equipment in a limited space;
The equipment is easy to operate and convenient for later management; Very low equipment failure rate;Product advantage
Operation of equipment in a limited space;
The equipment is easy to operate and convenient for later management;
Very low equipment failure rate; -

Talent advantage
Have excellent R & D personnel, and constantly improve the technical level of employees;
Team members are able to work hard and willing to try various challenges;
Rich experience in non-standard equipment industry;Talent advantage
Have excellent R & D personnel, and constantly improve the technical level of employees;
Team members are able to work hard and willing to try various challenges;
Rich experience in non-standard equipment industry; -

Service advantage
Customer-centric, according to customer needs to provide personalized service;
With an experienced and highly professional team, we can provide professional and efficient services.Service advantage
Customer-centric, according to customer needs to provide personalized service;
With an experienced and highly professional team, we can provide professional and efficient services.



























